ENIT

Technical Support

Quotations, lead times, documentation and direct assistance throughout every study.

In this section you will find some useful tools.

They are provided to make access to all our services as easy as possible.

Help with the quotation

Thanks to our experience and to the potential of the software at our disposal, we can provide the customer with an accurate quotation in a very short time, both for rapid prototyping and for simulation services.

To make the quotation phase even faster and more efficient, we recommend sending us the following data, depending on the service you are interested in:

Simulation Service

To provide you with a targeted quotation we need to know the current status of the project you want to study. A file representing the part or parts to be studied in simulation is welcome (preferably as a "closed" solid, in PARASOLID, STEP or IGES format). Any additional information you provide helps us to give you an increasingly accurate quotation, both in terms of cost and of lead time.

To collect the data in an orderly way you can download and fill in the questionnaire for your process:

Rapid Prototyping

The object you want to produce must be available in any 3D CAD format. If you do not have a 3D model, we can also create it, with additional time and cost to the prototyping service.

We prefer to receive STL files with a chordal tolerance of 0.01 mm but, as said, we can work with any 3D file format.

Stages and timing of each study

Process Simulation

Whether it is die casting or injection molding, a common timetable can be defined, as shown below. It should be considered an average for a "classic" simulation, consisting of a first check simulation and a second optimisation simulation.

  1. data receivedSTART
  2. quotation sentafter A FEW HOURS
  3. quotation accepteddepending on the customer's REPLY
  4. theoretical study of the part and simulation set-upSAME DAY / 1 DAY
  5. simulation run(s)1/2 DAYS depending on complexity
  6. results check and final reportabout 1 DAY
  7. results deliveredEND

On average, a simulation study is completed in 2/5 DAYS. Depending on the characteristics of the study these times may vary, becoming longer when many simulations are needed.

Our simulation service also includes the possibility of making geometric changes to the CAD models of both the parts and the feeding system.

In our workflow we also use artificial intelligence tools, as a support in preparing and cross-checking calculations and results. Every technical assessment remains the responsibility of our engineer.

During the various stages of the study a meeting with the customer is welcome, although not essential, so that we can offer a service tailored to the needs of the mold being examined.

Rapid Prototyping

Prototype lead times depend on the technology, size and number of parts: they are given case by case in the quotation.

What you receive

For every simulation job we carry out, besides any films or animated reports, the customer receives a complete and detailed report on all the work done, describing the initial study and summarising all the parameters used.

On request we can also supply the result files in a navigable format, so that the customer can consult the simulation directly in 3D: viewing instructions are given case by case.

File exchange: large files (geometries, reports, films) are exchanged via WeTransfer or through a dedicated shared area, which we indicate to the customer when the job starts.

Example of a result included in the simulation report
Every report documents the results and the parameters used.

Direct line assistance

For any clarification you may need, we are available to answer your questions or to follow you during the stages of the study, by phone, by e-mail or remotely.

These assistance services are available on working days, during office hours. The technical manager will answer each of your requests directly.